Bante900P Portable Multiparameter Water Quality Meter

Share:


Bante900P Portable Multiparameter Water Quality Meter

Bante900P Portable Multiparameter Water Quality Meter

High-performance multiparameter water quality meter contains 8 measurement modes, suitable for measuring pH, ORP, ion concentration, conductivity, TDS, salinity, resistivity and dissolved oxygen.

pH Mode:
• Portable multiparameter water quality meter is equipped with a backlit LCD display.
• 1 to 5 points calibration with automatic recognition for USA, NIST and DIN buffers.
• Automatic electrode diagnosis shows the pH slope and zero offset.

ORP Mode:
• 1 point offset calibration allows adjusting the displayed value to a known standard.
• Relative and absolute millivolt modes ensure the reliable ORP measurements.

Ion Concentration Mode:
• 2 to 5 points calibration, including the selection of 8 concentration points.
• Automatic electrode diagnosis shows the calibration points and slopes.
• Direct ion concentration readout simplifies the measurement process.
• Selectable concentration units (ppm, mg/L, mol/L) and ionic valency.

Conductivity/TDS/Salinity/Resistivity Modes:
• 1 to 5 points calibration with automatic recognition for conductivity standards.
• Selectable cell constant (K=0.1/1/10), reference temperature (20/25°C), TDS factor, linear and pure water compensations, seawater and practical salinity measurement modes.

Dissolved Oxygen Mode:
• 1 or 2 points calibration using the air-saturated water or zero oxygen solution.
• Salinity and barometric pressure compensations eliminate the measurement errors.

Other Features:• Automatic temperature compensation ensures accurate readings over the entire range.
• Auto-read function senses and locks the measurement endpoint.
• Calibration due alarm reminds the user to calibrate the meter regularly.
• Auto-power off effectively conserves battery life.
• Setup menu allows setting the number of calibration points, stability criteria, temperature unit,   date and time, etc.
• Reset function automatically resumes all settings back to the factory defaults.
• Expanded memory stores or recalls up to 500 data sets.
• USB communication interface is easy to transfer data to a PC.
• Multi-mode power scheme (batteries, power adapter, USB port) ensures the smooth operation of the meter.


Specifications:

   Model Bante900P
   pH  
   Range -2.000 to 20.000 pH
   Resolution 0.001 / 0.01 / 0.1 pH, selectable
   Accuracy ±0.002 pH
   Calibration 1 to 5 points
   pH Buffer Options USA / NIST / DIN / 2 custom buffers
   ORP  
   Range -1999.9 to 1999.9 mV
   Resolution 0.1 / 1 mV, selectable
   Accuracy ±0.2 mV
   Calibration 1 point
   Measurement Modes Relative / Absolute mV
   Ion Concentration  
   Range 0.00 to 19999 (depending on the range of ISE)
   Resolution 0.001, 0.01, 0.1, 1, automatic
   Accuracy ±0.5% F.S. (monovalent), ±1% F.S. (divalent)
   Calibration 2 to 5 points
   Calibration Solutions 0.001 / 0.01 / 0.1 / 1 / 10 / 100 / 1000 / 10000
   Measurement Units ppm, mg/L, mol/L, mmol/L
   Conductivity  
   Range 0 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
   Resolution 0.001, 0.01, 0.1, 1, automatic
   Accuracy ±0.5% F.S.
   Calibration 1 to 5 points
   Calibration Solutions 10 µS / 84 µS / 1413 µS / 12.88 mS / 111.8 mS
   Temperature Coefficient 0.0 to 10.0%/°C
   Pure Water Compensation Yes
   Reference Temperature 20 / 25°C
   Cell Constant   K=0.1 / 1 / 10 / Custom
   TDS  
   Range 0 to 10.00, 100.0, 1000 ppm, 10.00, 200.0 ppt
   Resolution 0.01, 0.1, 1, automatic
   Accuracy ±1% F.S.
   TDS Conversion Factor 0.1 to 1.0 (default 0.5)
   Salinity  
   Range 0.00 to 80.00 ppt / 0.00 to 42.00 psu
   Resolution 0.01
   Accuracy ±1% F.S.
   Resistivity  
   Range 0.00 to 20.00 MΩ
   Resolution 0.01
   Accuracy ±1% F.S.
   Dissolved Oxygen  
   Range 0.00 to 20.00 mg/L / 0.0 to 200.0 % saturation
   Resolution 0.01 / 0.1, selectable
   Accuracy ±0.2 mg/L / ±2.0 %
   Calibration 1 or 2 points
   Pressure Correction 60.0 to 112.5 kPa / 450 to 850 mmHg, manual
   Salinity Correction 0.0 to 50.0 g/L, manual
   Temperature  
   Range 0 to 105°C / 32 to 221°F
   Resolution 0.1°C/°F
   Accuracy ±0.5°C / ±0.9°F
   Calibration 1 point
   Calibration Range Reading ±10°C/°F
   Other Specifications  
   Temperature Compensation 0 to 100°C / 32 to 212°F, manual or automatic
   Hold Function Manual / Auto-read measurement endpoint
   Stability Criteria Low / High
   Calibration Due Alarm 1 to 31 days or off
   Auto-Power Off 10 / 20 / 30 minutes after last key pressed
   Memory Stores up to 500 data sets
   Output USB communication interface
   Connector BNC, 6-pin mini-DIN, 3.5 mm jack socket
   Display Custom LCD (80 × 60 mm)
   Power Supply 3 × 1.5V AA batteries or 5V DC power adapter
   Battery Life Approximately 150 hours without backlight
   Environmental Conditions 0 to 50°C / 32 to 122°F, relative humidity < 80%
   Dimensions 170 × 85 × 30 mm
   Weight 300 g
 

Ordering Info:

Ordering Code Meter Includes
   Bante900P-UK
   
P11 glass pH electrode
K10 conductivity electrode
DO100 dissolved oxygen electrode
TP-10K temperature probe
pH 4.01, 7.00, 10.01 buffer reagents
Conductivity standard solutions 84 µS/cm, 1413 µS/cm, 12.88 mS/cm
DO electrolyte solution
DO membrane cap
Electrode clip
Carrying case


 Inquiry - Bante900P Portable Multiparameter Water Quality Meter